 | |
|
| 釬焊板式換熱器特點(diǎn)： |
結構簡(jiǎn)單，易安裝：使用板片厚度小、傳熱系數高，換熱效率大于80%，滯液量少。
體積小、重量輕，節約運輸成本：總量?jì)H相當于管式換熱器的20%-30%�！�
可承受高溫高壓：溫度極限可達250℃,壓力可達45bar。
節能、用水量少：在相同的工作情況下，用水量只需要相當于管殼式換熱器的三分之一。
污垢系數低：湍流效果好，降低了污垢系數，從而減少清洗次數，節約維修成本。
不生銹、耐腐蝕：使用如316L、304等不銹鋼的板片，可以降低腐蝕問(wèn)題。
外形美觀(guān)、性能高...
|
| The characteristics of bazed plate heat exchanger： |
Simple structure and easy to be installed: the thickness of the plate is small, the heat transfer coefficient is high, the heat transfer efficiency is more than 80%, and the stagnant fluid is less.
Small size, light weight, saving transportation cost: the total amount is equivalent to 20%-30% of the tube type heat exchanger .
To bear high temperature and high pressure: the temperature limit of up to 250 degrees Celsius, the pressure can reach 45bar.
Energy saving, low water consumption: in the same work situation, the water consumption is only equivalent to 1/3 of shell and tube type heat exchanger.
Low fouling coefficient: the turbulence effect is good to lower the dirt coefficient , and the cleaning times are reduced , and the maintenance cost is saved.
No rust, corrosion resistance: the use of such as 316L, 304 stainless steel plate, can reduce the corrosion problems.
Beautiful appearance, high performance...
|
| |
|
掃描加我微信
